Welcome to the DAB Workshops and Equipment Booking System

DAB Facilities and Workshops - Induction info and Guidelines

Please Note
Equipment Store and Studios are open Mon - Fri between 9.00am - 4.30pm


All Equipment is to be picked up from the Equipment Store which is located on Level 2 of Building 6 (Room 2.19) adjacent to the Fabrication Workshop

Please be aware that our facilities and workshops have a 3-hour booking maximum

View Our Equipment Borrowing Guidelines Here

Workshops and Studios are now open for general bookings, limited places available.

For FABRICATION WORKSHOP bookings or induction please contact

fabworkshopstaff@uts.edu.au

For issues with door access, please contact

DABstudent.access@uts.edu.au

For LASER CUTTER, 3D PRINTER AND UV PRINTER bookings or inductions please contact

dab-digitalmakerspace@uts.edu.au

Fabrication Workshop

You MUST bring your own safety glasses and wear fully-enclosed shoes

Please download and read the following

Fabrication Workshop Safework Policy

If you wish to enter the Fabrication Workshop, you MUST comply with the following requirements

NO EXCEPTIONS.
NO FOOD/DRINK | WEAR ENCLOSED SHOES | HAIR TIED INTO A BUN | BRING OWN SAFETY GLASSES

Digital Maker Space


Complete level 1 Induction

Guides and Template

Laser Cutting Demo Videos

Submit A Digital Makerspace Bureau Service Request Here

If you wish to enter the Digital MakerSpace, please follow below the rules below. NO EXCEPTIONS.

NO USB | NO FOOD/DRINK | WEAR ENCLOSED SHOES | LONG HAIR TIED UP
You will be quizzed prior to ANY Digital MakerSpace Inductions.
Digital Makerspace Resources


Please note you will be issued 1 demerit point if you:

  • Do not attend your bookings or LATE for more than 30 mins for any bookings.
  • Intentionally using banned/toxic material in Digital MakerSpace.
  • Use USB or external device on any computers in Digital Makerspace.
  • Leave your machine running unattended.


IMPORTANT: Please note that you will be issued with 3 demerit points/suspended immediately if you:

  • Operate any equipment without complete an induction.
  • Intentionally not paying for material or/and machine time.
  • Intentionally damage or take works of others.
  • Intentionally damage equipment.

Sewing Workshop


Download Patterns



If you wish to work in the Sewing Workshop or Sewing Studio, please follow below the rules below:

WEAR ENCLOSED SHOES | LONG HAIR TIED UP | NO FOOD OR DRINKS | EAR/HEADPHONES- YOU MUST BE ABLE TO HEAR YOUR SURROUNDINGS

Please Note:
-You must book for an induction if you have not used the workshop before
-You must check in and check out on the iPad in the workshop
-You will be issued 1 demerit point if you don't attend your booking or if you are more than 30 mins late to your booking.

Contact Us:
Milena.Ratkovic@uts.edu.au (Fashion Workshop Supervisor)

Textiles Workshop


If you wish to work in the Textiles Workshop or Knit areas, please follow below the rules below:

WEAR ENCLOSED SHOES | LONG HAIR TIED UP | NO FOOD OR DRINKS | NO EAR/HEADPHONES

Please Note:
-You must book for an induction if you have not used the workshop before
-You must check in and check out on the iPad in the workshop
-You will be issued 1 demerit point if you don't attend your booking or if you are more than 30 mins late to your booking.

Contact Us:
jacob.hirsh@uts.edu.au(Workshop Supervisor)